Tamahagane in New York, NY

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle Chef's Knife, 8-Inch

Tamahagane SN1105

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $109.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle Chef's Knife, 7-Inch

Tamahagane SN1106

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $75.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle Sujihiki Slicer Knife, 10.5-Inch

Tamahagane SN1112

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $115.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle Sujihiki Slicer Knife, 9.5-Inch

Tamahagane SN1113

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $93.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle Santoku Knife, 7-Inch

Tamahagane SN1114

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $80.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle Bread Knife, 9-Inch

Tamahagane SN1118

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $114.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle Carving Fork, 6-Inch

Tamahagane SN1122

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $89.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle Cheese Knife, 6.25-Inches

Tamahagane SN1126

Features

The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.
The SAN knives are balanced with a stainless steel weight which attaches to the tang and is visible at the heel of the handle. Not only does this add to the beauty of the SAN design, it also creates fantastic balance.

Our Price $53.95

See Details

Check to Compare

Tamahagane Magnetic Rack

Tamahagane SN118

Features

Manufactured by Kataoka and Company in Niigata, Japan.

Our Price $53.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle 2-Pc Carving Set in Wooden Case

Tamahagane SN2122

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $197.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle 2-Pc Knife Set in a Gift Box

Tamahagane SN2201

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $110.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Brown Pakkawood Handle 4-Pc Steak Knife Set in Wooden Case

Tamahagane SN4123

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.

Our Price $206.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Blade with Brown Pakkawood Handle Chef's Knife, 8-Inch

Tamahagane SNH1105

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 61 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN TSUBAME knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN TSUBAME knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN TSUBAME edges.

Our Price $99.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Blade with Brown Pakkawood Handle Sujihiki Slicer Knife, 9.5-Inch

Tamahagane SNH1113

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 61 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN TSUBAME knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN TSUBAME knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN TSUBAME edges.

Our Price $102.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Blade with Brown Pakkawood Handle Bread Knife, 9-Inch

Tamahagane SNH1118

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 61 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN TSUBAME knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN TSUBAME knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN TSUBAME edges.

Our Price $104.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Blade with Brown Pakkawood Handle Sashimi Knife, 10.5-Inch

Tamahagane SNH1130

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 61 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN TSUBAME knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN TSUBAME knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN TSUBAME edges.

Our Price $125.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Blade with Brown Pakkawood Handle Sashimi Knife, 9.5-Inch

Tamahagane SNH1131

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 61 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN TSUBAME knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN TSUBAME knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN TSUBAME edges.

Our Price $112.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Blade with Brown Pakkawood Handle Nakiri Vegetable Knife, 7-Inch

Tamahagane SNH1165

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 61 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN TSUBAME knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN TSUBAME knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN TSUBAME edges.

Our Price $89.95

See Details

Check to Compare

Tamahagane SAN Kyoto Damascus Steel with Black Mikarta Handle Chef's Knife, 10.5-Inches

Tamahagane SNK1103

Features

The 63-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN KYOTO knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN KYOTO knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.
The SAN KYOTO knives are balanced with a stainless steel weight which attaches to the tang and is visible at the heel of the handle. Not only does this add to the beauty of the SAN KYOTO design, it also creates fantastic balance.

Our Price $215.95

See Details

Check to Compare

Tamahagane San Kyoto Damascus Steel with Black Mikarta Handle Chef's knife, 9-Inches

Tamahagane SNK1104

Features

The 63-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN KYOTO knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN KYOTO knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.
The SAN KYOTO knives are balanced with a stainless steel weight which attaches to the tang and is visible at the heel of the handle. Not only does this add to the beauty of the SAN KYOTO design, it also creates fantastic balance.

Our Price $210.95

See Details

Check to Compare

Tamahagane SAN Kyoto Damascus Steel with Black Mikarta Handle Chef's Knife, 8-Inch

Tamahagane SNK1105

Features

The 63-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN KYOTO knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN KYOTO knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.
The SAN KYOTO knives are balanced with a stainless steel weight which attaches to the tang and is visible at the heel of the handle. Not only does this add to the beauty of the SAN KYOTO design, it also creates fantastic balance.

Our Price $170.95

See Details

Check to Compare

Tamahagane SAN Kyoto Damascus Steel with Black Mikarta Handle Santoku Knife, 7-Inch

Tamahagane SNK1114

Features

The 63-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN KYOTO knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN KYOTO knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.
The SAN KYOTO knives are balanced with a stainless steel weight which attaches to the tang and is visible at the heel of the handle. Not only does this add to the beauty of the SAN KYOTO design, it also creates fantastic balance.

Our Price $160.95

See Details

Check to Compare

Tamahagane SAN Kyoto Damascus Steel with Black Mikarta Handle Bread Knife, 9-Inch

Tamahagane SNK1118

Features

The 63-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN KYOTO knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN KYOTO knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.
The SAN KYOTO knives are balanced with a stainless steel weight which attaches to the tang and is visible at the heel of the handle. Not only does this add to the beauty of the SAN KYOTO design, it also creates fantastic balance.

Our Price $188.95

See Details

Check to Compare

Tamahagane SAN Kyoto Damascus Steel with Black Mikarta Handle Nakiri Vegetable Knife, 7-Inch

Tamahagane SNK1165

Features

The 63-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN KYOTO knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN KYOTO knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.
The SAN KYOTO knives are balanced with a stainless steel weight which attaches to the tang and is visible at the heel of the handle. Not only does this add to the beauty of the SAN KYOTO design, it also creates fantastic balance.

Our Price $152.95

See Details

Check to Compare

Tamahagane SAN Kyoto Damascus Steel with Black Mikarta Handle 2-Pc Carving Set in Wooden Case

Tamahagane SNK2122

Features

The 63-ply stainless steel has an original thickness of 20 mm and is thinned by repeated rolling to a thickness of 2 mm. You might want to look at this rolling process as a modern forging technique. Also, this rolling process removes all the impurities in the steel leaving you with a very hard, very pure stainless steel. After the rolling processes, the V-G No. 5 cutting edge reaches a hardness of 58-60 degrees on the Rockwell scale and a final thickness of .65 mm. The outside layers each reach a thickness of .675 mm.
There are several different VG stainless steels. Kataoka selected V-G No. 5 stainless steel for the SAN KYOTO knives, because V-G No. 5 can be hardened as hard as any of the other V-G steels but has superior edge retention. Using scientific testing equipment (CATRA), Kataoka was able to show that their knives stayed sharper longer than knives made from other VG steels.
The edge on the SAN KYOTO knives is a minute, beveled edge. The angle of the edge is between 14 and 15 degrees. To appreciate the quality of the edge, you must first look at its incredible mirror polish and then try cutting with it. Kataoka has achieved the perfect balance between sharpness and strength with the SAN edge.
The SAN KYOTO knives are balanced with a stainless steel weight which attaches to the tang and is visible at the heel of the handle. Not only does this add to the beauty of the SAN KYOTO design, it also creates fantastic balance.

Our Price $278.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Black Mikarta Handle Chef's Knife, 10.5-Inch

Tamahagane SNM1103

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The knife from the Tamahagane SNM series is 3 layers of steel: the middle of the blade is made of hard, but fragile VG5 steel, which is supplemented with 2 layers of mild steel, making the blade very strong, hard, but at the same time retains its flexibility and does not lend itself to distortion and kinks. The knife is fully balanced and very easy to use in any kitchen.
After the rolling processes, the marerial of VG5 becomes harder and harder to be 61 degrees Rockwell Hardness in the final thickness of 0.65 mm. Meanwhile, the two outside layers of SUS410 will remain at 28 to 32 degrees to strengthen the blade and protect against damage and corrosion.
Sharpness is is the outstanding feature of the knife. The blade is sharper and remains sharpness longer than normal knives.

Our Price $125.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Black Mikarta Handle Sujihiki Slicer Knife, 10.5-Inch

Tamahagane SNM1112

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The knife from the Tamahagane SNM series is 3 layers of steel: the middle of the blade is made of hard, but fragile VG5 steel, which is supplemented with 2 layers of mild steel, making the blade very strong, hard, but at the same time retains its flexibility and does not lend itself to distortion and kinks. The knife is fully balanced and very easy to use in any kitchen.
After the rolling processes, the marerial of VG5 becomes harder and harder to be 61 degrees Rockwell Hardness in the final thickness of 0.65 mm. Meanwhile, the two outside layers of SUS410 will remain at 28 to 32 degrees to strengthen the blade and protect against damage and corrosion.
Sharpness is is the outstanding feature of the knife. The blade is sharper and remains sharpness longer than normal knives.

Our Price $125.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Black Mikarta Handle Bread Knife, 9-Inch

Tamahagane SNM1118

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The knife from the Tamahagane SNM series is 3 layers of steel: the middle of the blade is made of hard, but fragile VG5 steel, which is supplemented with 2 layers of mild steel, making the blade very strong, hard, but at the same time retains its flexibility and does not lend itself to distortion and kinks. The knife is fully balanced and very easy to use in any kitchen.
After the rolling processes, the marerial of VG5 becomes harder and harder to be 61 degrees Rockwell Hardness in the final thickness of 0.65 mm. Meanwhile, the two outside layers of SUS410 will remain at 28 to 32 degrees to strengthen the blade and protect against damage and corrosion.
Sharpness is is the outstanding feature of the knife. The blade is sharper and remains sharpness longer than normal knives.

Our Price $112.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Black Mikarta Handle 2-Pc Carving Set in Wooden Case

Tamahagane SNM2122

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The knife from the Tamahagane SNM series is 3 layers of steel: the middle of the blade is made of hard, but fragile VG5 steel, which is supplemented with 2 layers of mild steel, making the blade very strong, hard, but at the same time retains its flexibility and does not lend itself to distortion and kinks. The knife is fully balanced and very easy to use in any kitchen.
After the rolling processes, the marerial of VG5 becomes harder and harder to be 61 degrees Rockwell Hardness in the final thickness of 0.65 mm. Meanwhile, the two outside layers of SUS410 will remain at 28 to 32 degrees to strengthen the blade and protect against damage and corrosion.
Sharpness is is the outstanding feature of the knife. The blade is sharper and remains sharpness longer than normal knives.

Our Price $219.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Black Mikarta Handle 2-Pc Knife Set in Wooden Case

Tamahagane SNM2201

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The knife from the Tamahagane SNM series is 3 layers of steel: the middle of the blade is made of hard, but fragile VG5 steel, which is supplemented with 2 layers of mild steel, making the blade very strong, hard, but at the same time retains its flexibility and does not lend itself to distortion and kinks. The knife is fully balanced and very easy to use in any kitchen.
After the rolling processes, the marerial of VG5 becomes harder and harder to be 61 degrees Rockwell Hardness in the final thickness of 0.65 mm. Meanwhile, the two outside layers of SUS410 will remain at 28 to 32 degrees to strengthen the blade and protect against damage and corrosion.
Sharpness is is the outstanding feature of the knife. The blade is sharper and remains sharpness longer than normal knives.

Our Price $179.95

See Details

Check to Compare

Tamahagane SAN 3-ply Special Steel with Black Mikarta Handle 3-Pc Carving Set in Wooden Case

Tamahagane SNM3301

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The knife from the Tamahagane SNM series is 3 layers of steel: the middle of the blade is made of hard, but fragile VG5 steel, which is supplemented with 2 layers of mild steel, making the blade very strong, hard, but at the same time retains its flexibility and does not lend itself to distortion and kinks. The knife is fully balanced and very easy to use in any kitchen.
After the rolling processes, the marerial of VG5 becomes harder and harder to be 61 degrees Rockwell Hardness in the final thickness of 0.65 mm. Meanwhile, the two outside layers of SUS410 will remain at 28 to 32 degrees to strengthen the blade and protect against damage and corrosion.
Sharpness is is the outstanding feature of the knife. The blade is sharper and remains sharpness longer than normal knives.

Our Price $249.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Steel with Black Mikarta Handle Chef's Knife, 10.5-Inch

Tamahagane SNMH1103

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel starts out with a thickness of 20mm and with a modern repeated rolling-forging technique, it is thinned to a thickness of 2mm. This rolling technique also removes all of the impurities in the steel resulting in a very hard, pure stainless steel. After the rolling process is completed, the VG No.5 cutting edge obtains a hardness of 61 minute degrees on the Rockwell scale with a final thickness of 0.65mm, while the outer layers each obtain a thickness of 0.675mm.
The edge on the SAN knives is a beveled edge with the angle being between 14 and 15 degrees. When you look at the awesome mirror polish and try cutting with it, then you will appreciate the quality of the edge. Kataoka has once again achieved the optimal balance between strength and sharpness with the SAN and SAN TSUBAME Knives edges.
The blade of the SAN TSUBAME is hand-hammered half way down from the spine. The whole blade is then sandblasted but this technique only affects the soft SUS410 stainless steel outer layers thus leaving this layer with a matte finish and the core VG No. 5 with a mirror finish. The sandblasting and hammering process gives the SAN TSUBAME a highly rich appearance.

Our Price $125.95

See Details

Check to Compare

Tamahagane San Tsubame Hammered 3-ply Special Steel with Black Mikarta Handle Chef's Knife, 9.4-Inches

Tamahagane SNMH1104

Features

The 3-ply stainless steel starts out with a thickness of 20mm and with a modern repeated rolling-forging technique, it is thinned to a thickness of 2mm. This rolling technique also removes all of the impurities in the steel resulting in a very hard, pure stainless steel. After the rolling process is completed, the VG No.5 cutting edge obtains a hardness of 61 minute degrees on the Rockwell scale with a final thickness of 0.65mm, while the outer layers each obtain a thickness of 0.675mm.
The edge on the SAN knives is a beveled edge with the angle being between 14 and 15 degrees. When you look at the awesome mirror polish and try cutting with it, then you will appreciate the quality of the edge. Kataoka has once again achieved the optimal balance between strength and sharpness with the SAN and SAN TSUBAME Knives edges.
The blade of the SAN TSUBAME is hand-hammered half way down from the spine. The whole blade is then sandblasted but this technique only affects the soft SUS410 stainless steel outer layers thus leaving this layer with a matte finish and the core VG No. 5 with a mirror finish. The sandblasting and hammering process gives the SAN TSUBAME a highly rich appearance.
The SAN TSUBAME knives are balanced with a stainless steel weight that attaches to the knifes tang and is located at the heel of the handle. This not only adds to the beauty of the design, but also produces a fantastic balance.

Our Price $112.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Steel with Black Mikarta Handle Chef's Knife, 8-Inch

Tamahagane SNMH1105

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel starts out with a thickness of 20mm and with a modern repeated rolling-forging technique, it is thinned to a thickness of 2mm. This rolling technique also removes all of the impurities in the steel resulting in a very hard, pure stainless steel. After the rolling process is completed, the VG No.5 cutting edge obtains a hardness of 61 minute degrees on the Rockwell scale with a final thickness of 0.65mm, while the outer layers each obtain a thickness of 0.675mm.
The edge on the SAN knives is a beveled edge with the angle being between 14 and 15 degrees. When you look at the awesome mirror polish and try cutting with it, then you will appreciate the quality of the edge. Kataoka has once again achieved the optimal balance between strength and sharpness with the SAN and SAN TSUBAME Knives edges.
The blade of the SAN TSUBAME is hand-hammered half way down from the spine. The whole blade is then sandblasted but this technique only affects the soft SUS410 stainless steel outer layers thus leaving this layer with a matte finish and the core VG No. 5 with a mirror finish. The sandblasting and hammering process gives the SAN TSUBAME a highly rich appearance.

Our Price $89.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Steel with Black Mikarta Handle Chef's Knife, 7-Inch

Tamahagane SNMH1106

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel starts out with a thickness of 20mm and with a modern repeated rolling-forging technique, it is thinned to a thickness of 2mm. This rolling technique also removes all of the impurities in the steel resulting in a very hard, pure stainless steel. After the rolling process is completed, the VG No.5 cutting edge obtains a hardness of 61 minute degrees on the Rockwell scale with a final thickness of 0.65mm, while the outer layers each obtain a thickness of 0.675mm.
The edge on the SAN knives is a beveled edge with the angle being between 14 and 15 degrees. When you look at the awesome mirror polish and try cutting with it, then you will appreciate the quality of the edge. Kataoka has once again achieved the optimal balance between strength and sharpness with the SAN and SAN TSUBAME Knives edges.
The blade of the SAN TSUBAME is hand-hammered half way down from the spine. The whole blade is then sandblasted but this technique only affects the soft SUS410 stainless steel outer layers thus leaving this layer with a matte finish and the core VG No. 5 with a mirror finish. The sandblasting and hammering process gives the SAN TSUBAME a highly rich appearance.

Our Price $80.95

See Details

Check to Compare

Tamahagane SAN Tsubame Hammered 3-ply Special Steel with Black Mikarta Handle Petty Utility Knife, 6-Inch

Tamahagane SNMH1107

Features

Manufactured by Kataoka and Company in Niigata, Japan.
The 3-ply stainless steel starts out with a thickness of 20mm and with a modern repeated rolling-forging technique, it is thinned to a thickness of 2mm. This rolling technique also removes all of the impurities in the steel resulting in a very hard, pure stainless steel. After the rolling process is completed, the VG No.5 cutting edge obtains a hardness of 61 minute degrees on the Rockwell scale with a final thickness of 0.65mm, while the outer layers each obtain a thickness of 0.675mm.
The edge on the SAN knives is a beveled edge with the angle being between 14 and 15 degrees. When you look at the awesome mirror polish and try cutting with it, then you will appreciate the quality of the edge. Kataoka has once again achieved the optimal balance between strength and sharpness with the SAN and SAN TSUBAME Knives edges.
The blade of the SAN TSUBAME is hand-hammered half way down from the spine. The whole blade is then sandblasted but this technique only affects the soft SUS410 stainless steel outer layers thus leaving this layer with a matte finish and the core VG No. 5 with a mirror finish. The sandblasting and hammering process gives the SAN TSUBAME a highly rich appearance.

Our Price $67.95

See Details